Description
| SPEC ITEM | DESCRIPTION |
| Size | |
| General Size | 6.2″ to 22″ |
| Fit in with | Panel display device |
| Mechanical | |
| Input Method | Finger or gloved hand (rubber ,cloth or leather) |
| Active Force | Stylus or Finger or Similar ≦45g~110g |
| Ball Impact | ø13.0. Steel Ball/9g, Height=30cm, 1 time, no damage [Impact at center area] |
| Durability | >35 million touches |
| Positional Accuracy | <1.5% |
| Optical | |
| Light Transmission | 80%（Meet ASTM D1003） |
| Clear surface | ≦3% |
| Antiglare Surface | ≦4% |
| Anti-Newton | ≦10% |
| Gloss | 90±20 gloss units tested on a hard-coated front surface Accordance with ASTM D 2457 |
| Electrical | |
| Supply voltage | DC5V |
| Circuit Resistance | X:20~250Ω, Y:20~250Ω (See Figure 1) |
| Linearity | X≦1.5%, Y≦1.5% |
| Response | ≦15ms |
| Insulation | ≧20MΩ/25V(DC) |
| Endurance | No acting damage at DC50V/60sec. |
| Resolution | Based on controller resolution of 4096 x 4096 |
| Environmental | |
| Operation Temperature | -10℃ ~ +70℃ |
| Operation Humidity | 20%RH ~ 85%RH, no condensing |
| Storage Temperature | -40℃ ~ +80℃ |
| Storage Humidity | 10%RH ~ 90%RH, no condensing |
| Waterproof | Not damaged by running water applied to the active area |
| Reliability | |
| Heat Cycle | 70℃ /240 hrs |
| Cold Cycle | -40℃ /240 hrs |
| Thermal Cycle | -40℃ ~70℃ [60 min./cycle] *10 cycles |
| Operating System | |
| Operation System | Linux/ Dos / Windows ME/95/98 / NT4.0/XP/2000/Mac OS |
