| SPEC ITEM | DESCRIPTION |
| Display |
| Chipset | Intel® 852GM |
| Intel® 82801DB I/O Controller Hub (ICH4) |
| Display Interface | Intel® 852GM integrated dynamic video shared memory, 64 MB max adjusted by OS |
| 1 x D-sub 15-pin VGA port |
| Resolution: Up to 1600 x 1200 for CRT or up to 1280 x 1024 for TFT |
| Internal LVDS: Supports 18/24-bit single pixel or 18-bit dual pixel LVDS pan |
| I/O |
| I/O | Serial port: 2 port, with 2×5 box header (optional COM2 RS-232/422/485 by switch for Peak 736VL2 only) |
| USB 2.0 port x 4 through 1×6 box header |
| HDD: 2 x 40-pin connector, support ultra ATA 100/66/33 |
| Disk on Module: 1 x 2-pin power connector for DOM |
| Syste |
| BIOS | Award System BIOS |
| Plug & Play support |
| Advanced Power Management and Advanced Confi guration & Power Interface support |
| 4 Mbit fl ash ROM |
| CPU | Single 478 uFCPGA/479 uFCBGA socket |
| Supports Intel® Pentium® M: 1 or 2 MB L2 Cache, 400 MHz FSB, speeds up to 1.8 GHz |
| Supports Intel® Celeron® M: 512 KB or 1 MB L2 Cache, 400 MHz FSB, speeds up to 1.5 GHz |
| Dimensions | 338.58 mm (L) x 122 mm (W) (13.3” x 4.8”) |
| Ethernet | 2 x Intel® 82551ER 10/100 Fast Ethernet |
| 2 x RJ45 with LED |
| HyperTransport™ Technology | 1 x ITE 8888F PCI to ISA Bridge |
| Provides 64 mA to support max. 20 ISA slots on the backplane |
| Memory | 2 x 184-pin DDR DIMM |
| Supports unbuffered non-ECC DDR memory up to 2 GB |
| Operating Temperature | Operating temperature: 0°C to 60°C |
| Storage temperature: -20°C to 80°C |
| Relative humidity: 10% to 90% (Non-condensing) |
| Power Consumption | CPU/Memory: 1.7 GHz/1 GB |
| 5 V: 5.25 A |
| 12 V: 0.15 A |
| 3.3 V: 0 A |
| 5 Vsb: 0.05 A |
| Power Supply | Power source from backplane through PCI/ISA golden finger |
| Supports both AT or ATX power supplies |
| +3.3 V is converted from +5 V and not directly from backplane or power supply |
| +5 Vsb (standby power) is connected from backplane through 3-pin connect |
| RTC | On-chip RTC with battery back up |
| 1 x External Li-Ion battery |
| SSD | HDD:, 2 x 40-pin connector suport ultra ATA 100/66/33 |
| Disk on Module: 1 x 2-pin power connector for DOM |
| System Monitor | System monitor controller derived from IT8712 |
| 6 voltage (For +3.3 V, +5 V, +12 V, Vcore, +5 V Standby, and +3.3 V Standby) |
| 2 fan speed (For CPU and system) |
| 2 temperature (One for CPU, one for system) |
| Watchdog Timer | 1 ~ 128 second time-out intervals |
